Automobile compartment panel machine Automobile compartment panelbr/> 1. Automobile compartment panel machine manufacturer
Equipment dimensions
Equipment power kilowatts, hydraulic station power kilowatts
The rollers are made of bearing steel. Annealed after forging
The base is made of steel
The bottom five and the top four are leveled to ensure smoothness
The two-step forming method is used to ensure the squareness and right angles of the product, and the upper part can be made in any size
Thickness of rolling material. (Thickness can also be designed according to user requirements)
The width of rolled steel is
Rolling speed/
Using a new butt-type adjustment steel sleeve, which is simple, fast and Sturdy
The equipment and the profiled steel produced are square, which has the advantages of fast adjustment speed, fast punching and fast cutting in the same industry.
2.
How to maintain the color steel tile press equipment
Hydraulic oil circuit
If the color steel equipment undergoes hydraulic system maintenance, the oil level in the oil tank should also be checked weekly. If the oil level is lower than the oil window, hydraulic oil should be added
. It should not exceed ℃. The system oil temperature should be between ℃ ~ ℃. If it is too high, it will cause the deterioration and damage of the oil and accessories.
.The hydraulic oil used in this machine is or
Hydraulic components
.Cleaners cannot be used. Clean hydraulic components (base plates, valves, motors, pumps, oil pipes, etc.) every month to prevent dirt from entering the system. .
.Check whether there is deformation in the bends of each oil pipe of the tile press after one month of use of the new machine. If there is any abnormality, it should be replaced. After two months of use, the connections of all accessories should be tightened. When doing this work, the machine should be turned off and the system should be free of pressure.
Filter
The filter should be replaced or thoroughly cleaned every time the oil is changed.
.Check and clean the air filter on the fuel tank every month. It is best to replace it every year.
. It should be replaced. The machine tool has relevant alarms or other filter abnormalities such as dirty oil quality
Automobile compartment panel machine Large automobile compartment panel forming machine Automobile compartment panel machine manufacturer