Hebei Cangzhou Tianxiang Tile Press Co., Ltd.

Copy of several-shaped steel forming machine
, technical parameters
, equipment overall dimensions
m*
m*
m
, equipment weight approx.
>Tons
)
, motor power
)
, oil pump power
)
, flying saw cutting power
)
, production speed
meters/
per minute
)
, electric three fires and one zero
)
, number of forming rows
rows
)
, equipment control is
control
)
, profile thickness
)
, profile size*
( No. cannot be changed)
)
, journal
(solid shaft)
)
, purpose greenhouse purlin
)
2. Pressure Introduction to the driving device of the tile press and winter maintenance
) If a chain is used to drive all the upper and lower shafts of the tile press, the amount of adjustment of the shaft will be very small, and the speed will also be restricted. The modified chain drive will have a relatively large impact. The vertical adjustment ability of the shaft. A small amount of movement of the upper shaft will reduce the contact of the gear. This kind of meshing outside the pitch circle will cause unstable transmission and easily cause damage to the teeth. The upper shaft will move upward again, so the gear will be separated. Without meshing, if the roll is trimmed smaller, the upper and lower shafts must be smaller, and the gears will restrict the downward movement.
)Winter Maintenance
) When the temperature is below zero, the color steel equipment should be connected to the power supply and preheated for several minutes before use to avoid greater noise.
), the hydraulic system of the automatic tile press, that is, the pump station, must be replaced with winter hydraulic oil when used in winter. Coat all moving parts of the color steel tile press equipment with engine oil. It is best to use waste paper to coat the chains and sprockets with butter.
), Northern users should clean the upper and lower molds when the color tile equipment is not producing due to cold weather, and apply engine oil on the surface of the molds to prevent rust and scratches after reuse. Phenomenon
)