Configuration of the tile press The color steel tile press will be equipped with a lubrication system. When the machine is running, it will automatically lubricate all load-bearing bearings, transmission gear mechanism movement guide rails and other parts. Cold-formed steel is the main material for making lightweight steel structures. It is made of cold-formed steel plates or steel strips. The wall thickness of the profiled steel machine can be made very thin, which greatly simplifies the production process and improves production efficiency. It can produce various profiles and cold-formed color steel equipment of different materials with uniform wall thickness but complex cross-sectional shapes that are difficult to produce by ordinary hot rolling methods.
The workbench of the color steel tile press has six processes. The turning of the workbench (i.e. hexagonal runner), in addition to the first-level mechanical indexing and positioning, is also equipped with a set of precision positioning mechanisms to completely ensure that every time During the stamping process, the workbench mold is accurately positioned. The slide table on which the upper mold is installed is a box structure. The slide table guide rail and the guide rail on the fuselage have a long contact length. Each stamping of the upper mold requires a second stamping of the mud blank. That is, after the upper mold presses the tile blank into place for the first time, the upper mold rises ㎜, so that the mud blank is fully exhausted, and then the upper mold presses the tile blank downward until it reaches the position, and then returns to the highest position. Therefore, the mold has a long service life and the pressed product Good quality
News